clear cylinder container machine inspection

More than testing, adjusting and debugging clear cylinder box machine, we also carry out a particularly important method of machine inspection before delivery .

When debugging the clear cylinder container machine copper mold and the substrate copper disk, place the copper disk on the benchmark circular surface of the substrate mold size adjustment copper bar, which is called the substrate. Use a screwdriver to loosen all screws on the copper bar, and then lock the mold between the substrates.

The edge of the mold of clear cylinder container machine needs to be covered with a layer of flannel cloth to prevent the mold edge from scratching the product during production.

Then, push the copper bar towards the center of the clear cylinder container machine mold, so that the bearing on the copper bar is close to the edge of the mold.

Do not use force to press it tightly, only approach it. Lock the screws on the copper bar. The copper bars close to the mold need to be tightly attached, and there should be no too large gaps, especially for small products. Excessive gaps can cause material to be carried in front of the mold. Abnormal or excessive resistance may result in abnormal production.